Malua is shipshape and like Bristol. All things are in their place and
all lines and halyards are now ready to use but as always the weather
decided we had to wait.
There was a very deep depression off the coast of Virginia which moved
eastwards towards New York and then on to New England. It dumped a lot
of snow on that part of the world. While this storm was forming it must
have caused the sea to build and upset the Gulf stream flowing north so
I thought it was prudent to wait 24 hours for the sea state to calm
before we set off south on the first cruise of the season.
We are off on Monday south to Georgetown Bahamas.
A magical moment on Malua
The blog of HarryWS and my yacht Malua. We sailed Australia, the Pacific, Europe, Caribbean and USA. I built Malua in Canberra then cruised the Pacific through New Zealand, Tonga, Fiji and Vanuatu during 2004. Malua was in the Mediterranean in 2007 at the start of a cruise westwards round the world. After a trip up the French canals we crossed the Atlantic, cruised the Caribbean including Cuba. From the east coast of USA through the Panama canal to Galapagos then the wide Pacific to Australia.
17 February, 2014
16 February, 2014
Provisioning and storage
Eating
well on passage and while cruising is always one of the highest
priorities on Malua. When I built Malua I constructed an extra large
freezer and fridge so we could freeze meat and keep the beers and white wine cold. It worked well in the
Pacific but started to require more time when I left the Med. I suspected
it had leaked some gas so in Gibraltar I called the local
refrigeration “expert” who vacuumed the system then tried to fill
it with the correct gas. He did not have the correct gauges and had
to guess the quantity of gas to add. Well crossing the Atlantic it
started to go down hill and in the latter part of last years cruise
the compressor was working but working hard.
It was time to replace the unit.
It was time to replace the unit.
As
with most technical things purchased in Australia the unit I had
selected was no longer made so I called the Isotherm parts people to
ask for a replacement. What followed was a third degree about the
specifications of the holding plate, box size, insulation thickness
and connectors. In the end I just stated “Will you sell me Unit
xxyy for $Z – you have no liability about the functionality. I know
what I am doing?” Yes But. Well it arrived. I installed it,
connected up the tubes and then connected the refill can of 142A
refrigerant gas with my gauges and started the process. It worked
perfectly. The next day the freezer was at minus 8. Now to put some
goods in it.
A magical moment on Malua
Subscribe to:
Posts (Atom)